Introduction to the skills and contents of wall ti

2022-07-22
  • Detail

I believe everyone should know that wall tiles are a very good material for wall decoration. At present, there are a wide range of wall tile brands, types, styles and colors on the market. Compared with the past, it will be much more beautiful to simply brush putty powder and stick a wall brick on the wall. Then, the content of wall tile skills should be unfamiliar to everyone. Now let's give you a good introduction

I believe everyone should know that wall tiles are a very good material for wall decoration. At present, there are a wide range of wall tile brands, types, styles and colors on the market. Compared with the past, it will be much more beautiful to simply brush putty powder and stick a wall brick on the wall. Then, the content of wall tile skills should be unfamiliar to everyone. Now let's give you a good introduction

1. Introduction of wall tile skills

a, construction preparation

first, treat the base course. Residual oil stains on the basic surface should be cleaned with a wire brush; If there are obvious concave convex parts on the surface of the substrate, it should be leveled first or paved with 1:3 cement mortar; However, the surface is painted wall, so it is recommended to use washing materials to remove the paint

b, soaking

before paving with cement and mortar, the glaze should be cleaned first, and then the wall tiles should be soaked in clean water for not less than 2 hours; After that, take out the wall tiles and dry them in the shade. Do not pave them while soaking in water

c, pre arrangement

pre arrangement should be carried out before paving. When pre arranging, it should be noted that there should be no more than one row of incomplete bricks in the horizontal and vertical arrangement of the same wall. Incomplete bricks are incomplete bricks, and incomplete bricks should be arranged in the most unobtrusive parts or internal corners to ensure the beauty of the whole wall

d, paving

paving is the last step of wall tile laying skills. It is required to level the ground with a level ruler according to the indoor standard horizontal line. Then, cement and fine sand are mixed into cement slurry in the ratio of 1:3 for construction; Set the vertical line with a hammer and thoroughly trowel it

2. What matters should be paid attention to when pasting wall tiles

a. When paving wall tiles, the construction team often needs to apply putty on the wall. If the putty is not removed, the tiles are directly pasted, which has a great potential safety hazard. The cement is too strong to hang on the putty, which is easy to cause the falling off of tiles

b. Pre lay the tiles before paving. If you wait until the tiles are paved to a certain extent, it will be found that the tile arrangement effect is not good and the proportion is not coordinated. If you remove them and pave them again, it will cause unnecessary loss and waste

c. Wall tiles soaked in water cannot be sold again, and merchants will not accept returns. Therefore, when soaking the wall tiles, we must instruct the workers to calculate the specific amount before soaking, and how much to soak, so as not to cause too much waste

conclusion: the above is an introduction to the skills of wall tiling and what matters need to be paid attention to in wall tiling. In fact, laying wall tiles is not a very difficult thing, but we need to be very serious and careful in the process of laying. If you don't pay attention, it is very likely that a mouse excrement will harm a pot of porridge. Therefore, in order to ensure the overall perfect effect, you need to be extremely cautious in laying

济南男科医院

合肥不孕不育医院

天津男科医院

Copyright © 2011 JIN SHI