The hottest printing industry policy quotation in

2022-10-18
  • Detail

In 2009, the printing industry policy quotation

1. The country promoted the consumption of rural policies

China began to promote the policy of rural market consumption. The government introduced a 13% subsidy policy for rural household appliances and a government subsidy policy for large agricultural machinery and tools. While increasing product consumption, it also drives the consumption of packaging and printing products

2. The unification of income tax laws for enterprises of all forms of ownership

the new tax law has brought many benefits to printing and printing equipment enterprises, the most important is that the income tax rate of domestic and foreign-funded enterprises is unified at 25%. It has created a market environment of fair competition, and domestic and foreign printing enterprises will stand on the same starting line. The enterprise income tax law and the regulations for the implementation of the enterprise income tax law have been implemented since January 1st, 2008. According to the analysis of insiders, the new tax law will bring seven benefits to the printing and equipment manufacturing industry: the income tax rate of domestic and foreign-funded enterprises will be unified at 25%, the reasonable wage and salary expenses incurred by enterprises will be allowed to be deducted, and the deduction ratio of advertising fees and business publicity fees will be unified and increased, Qualified small low profit enterprises are taxed at a reduced tax rate of 20%, high-tech enterprises are taxed at a reduced tax rate of 15%, environment-friendly and energy-saving printing enterprises can be reduced or exempted, and technological innovation will receive a number of concessions

3. Imported printing equipment can apply for discount interest

printing enterprises can obtain discount interest funds up to 6%~7% of the import amount by applying for three offset printing machines and one die-cutting machine imported within the specified technical parameters in 2007. The Ministry of Finance and the Ministry of Commerce jointly issued the notice on doing a good job in the declaration of import discount funds in 2007, which stipulates that some equipment imported in 2007 can apply for discount funds. Under the active coordination of the General Administration of publication, there are three kinds of offset printing machines that can apply for discount interest, namely, web offset printing machines for newspapers (), commercial web offset printing machines (), sheet fed offset printing machines (and). In addition, die cutting machine () which is widely used in the packaging and printing industry can also be applied for. The standard of import discount interest is: take the import amount as the principal for calculating the discount interest, and the discount interest rate is not higher than the latest one-year RMB loan interest rate published by the people's Bank of China at the time of discount interest liquidation. The Ministry of Finance and the Ministry of Commerce shall determine the discount coefficient within the total annual discount funds and verify the discount amount

4. The export tax rebate rate of some printing products will be increased

from November 1, 2008, the export tax rebate rate of some publications and paper stationery will be raised to 13% and 11% respectively. On October 21, 2008, the Ministry of Finance and the State Administration of Taxation issued the notice on increasing the export tax rebate rate of some commodities, which appropriately increased the export tax rebate rate of some labor-intensive, high-tech and high value-added commodities from November 1, 2008. The export tax rebate rate for some publications and paper stationery will be raised to 13% and 11% respectively. The first is paper stationery. In Chapter 48 of the customs commodity code, the commodity code is mostly paper stationery. The previous export tax rebate rate was 5% and 7%, but now it has increased to 11%. The second is publications. In Chapter 49 of the customs commodity code, commodity codes,,, are mostly publications. Previously, the export tax rebate rate was between 11% and 13%, and now the issue of improvement is under discussion

5. Enterprises implement mandatory cleaner production

"double super" enterprises and "double have" (toxic and harmful) enterprises implement mandatory cleaner production audits. The photosensitive material waste produced by the printing industry is a "double have" substance that has been hit hard by the rise in domestic and aluminum prices in the United States. In July, 2008, the Ministry of environmental protection issued the notice on Further Strengthening the cleaner production audit of key enterprises, requiring environmental protection departments at all levels to supervise the implementation of compulsory cleaner production audit by "double super" enterprises and "double owned" enterprises in accordance with the provisions of the cleaner production promotion law

6. Deductible value-added tax on equipment purchased by printing enterprises

from January 1, 2009, all general value-added tax taxpayers nationwide (regardless of regions and industries) are allowed to deduct the input tax contained in their newly purchased equipment. The input tax that has not been deducted will be carried forward to the next period, and the printing industry will also benefit. In November, 2008, the executive meeting of the State Council reviewed and approved in principle the Provisional Regulations of the people's Republic of China on value added tax, and decided to implement the value-added tax transformation plan nationwide in 2009. The main content of this value-added tax transformation reform is: from January 1, 2009, on the premise of maintaining the current value-added tax rate unchanged, all general value-added tax taxpayers nationwide (regardless of regions and industries) are allowed to deduct the input tax contained in their newly purchased equipment, and the input tax that has not been deducted is carried forward to the next period. The scope of fixed assets that are allowed to be deducted is mainly machinery, machinery, means of transportation and other equipment, tools, appliances related to production and operation, and real estate such as houses and buildings cannot be included in the deduction scope of value-added tax. As a supporting measure for the reform of value-added tax transformation, the value-added tax exemption policy for imported equipment that has benefited printing enterprises and the value-added tax rebate policy for foreign-invested enterprises to purchase domestic equipment will be cancelled accordingly

7. The threshold for Hong Kong and Macao to invest in mainland packaging and printing enterprises has been lowered.

from January 1, 2009, Hong Kong and Macao will set up packaging and decoration printing enterprises in the mainland, and the minimum registered capital will be implemented by comparing with mainland enterprises. On July 29 and 30, 2008, the Ministry of Commerce and the governments of the Hong Kong and Macao special administrative regions signed the "supplementary agreement V on the mainland and Hong Kong Closer Economic Partnership Arrangement" and the "supplementary agreement V on the mainland and Macao Closer Economic Partnership Arrangement". These two agreements will be officially implemented from January 1, 2009. The annexes of these two agreements stipulate that the specific commitment of the mainland to Hong Kong and Macao printing and publishing services is: the minimum registered capital requirements for Hong Kong and Macao service providers to set up printing enterprises engaged in packaging and decoration printing in the mainland, compared with mainland enterprises. The minimum registered capital for Hong Kong and Macao to invest in mainland packaging, decoration and printing enterprises was 10million yuan before, and will enjoy "national treatment" from 2009, which is 1.5 million yuan, the same as that of mainland enterprises. This means that the threshold for Hong Kong and Macao to invest in the mainland printing industry will be further reduced, which will be conducive to the mainland printing industry to attract Hong Kong and Macao capital

8. Hong Kong funded cleaner production of printing enterprises in the Pearl River Delta

the Hong Kong government allocated HK $93.06 million to support cleaner production of Hong Kong funded enterprises in the Pearl River Delta in eight industries, including the printing and publishing industry. After nearly 20 years of development, the printing industry in the Pearl River Delta is now facing transformation and upgrading. Raising the threshold of environmental protection should be one of the transformation contents. The Hong Kong government's subsidy for cleaner production of Hong Kong funded printing enterprises in the Pearl River Delta shows the trend that the government encourages the printing industry to develop in the direction of environmental protection. In April, 2008, the "Cleaner Production Partnership Plan" launched by the governments of Guangdong and Hong Kong was officially launched. The Hong Kong government allocated HK $93.06 million to assist Hong Kong funded enterprises in eight major industries in the Pearl River Delta, including printing and publishing, in cleaner production within five years of the optimization of processing and molding processes. The Hong Kong Productivity Council (HKPC) is the executive body of this project. China business United Printing (Hong Kong) Co., Ltd. and Leo paper printing group participated in a preliminary test of this plan in 2006. In July, 2008, a seminar on how to implement cleaner production in the printing industry aimed at promoting this plan was held in Dongguan, Guangdong Province. This program mainly supports three projects. The first is the on-site assessment, which can be funded up to HK $15000. Second, demonstration projects of cleaner production technology and operation methods can receive an average of HK $160000. The third is to verify the effectiveness of the improvement project, with a maximum subsidy of HK $15000

9. The labor contract law has brought new topics

focusing on the protection of the rights and interests of workers, but also giving full consideration to the interests of employers. The printing industry is a labor-intensive industry with complex staff composition and high mobility, which makes it difficult to bind the relationship between workers and enterprises. Today, when the printing industry has entered the era of small profits, the labor contract law is undoubtedly a labor problem for printing enterprises

on January 1st, 2008, the labor contract law of the people's Republic of China came into force. The main contents are: employment cannot be done without signing a written contract, the contract can no longer be signed once a year, the liquidated damages cannot be set at will, the probation period is no longer a cheap construction period, it can no longer be easy for enterprises to dismiss employees, rules and regulations are no longer decided unilaterally, and enterprises cannot avoid risks through labor dispatch. Among them, the provisions on the non fixed term labor contract that is most concerned by all walks of life are: when there are specific circumstances, the employer should sign a non fixed term labor contract with the worker, including: the worker has worked in the employer for 10 years continuously; When the employing unit first implements the labor contract system or re concludes the labor contract due to the restructuring of state-owned enterprises, the worker has worked in the employing unit for more than 10 years and is less than 10 years away from the legal retirement age. In addition, after the fixed-term labor contract has been signed twice in a row, the non fixed-term labor contract should also be signed if the contract is renewed again

10. 10 kinds of waste from the printing industry are listed in the national catalogue of hazardous waste.

with the continuous improvement of control accuracy,

the supporting policies of the law on the prevention and control of environmental pollution by solid waste, the law stipulates that units that produce hazardous waste must dispose of hazardous waste in accordance with relevant national regulations. Insiders analyzed that the introduction of this policy is a good thing, but it is difficult to implement it concretely. Because of the high processing cost of printing waste, printing enterprises in the era of low profits are "more willing than able"

in June 2008, the Ministry of environmental protection and the national development and Reform Commission issued the revised national catalogue of hazardous wastes, which included 49 categories of hazardous wastes from dozens of industries, including the printing industry. There are mainly seven kinds of hazardous wastes in the printing industry: photosensitive material wastes, chromium containing wastes, copper containing wastes, mercury containing wastes, lead containing wastes, waste halogenated organic solvents, and waste organic solvents. These wastes mainly come from waste developing (fixing) solution, film and waste image paper, waste etching solution, adhesive, and the manufacturing process of printed circuit board. Waste liquid from lead tin alloy plating, rubber printing with organic solvent, and waste organic solvent from cleaning printing tools

11. The ten major industrial revitalization plans were issued

in order to implement the national economic growth target of 8%, since 2009, the ten major industrial revitalization plans have been released one after another. On January 14, the revitalization plan for the steel and automobile industry was approved by the executive meeting of the State Council; On February 4, the adjustment and revitalization plan for the textile industry and equipment manufacturing industry was also approved in principle; On February 11, the State Council reviewed and approved in principle the plan for the adjustment and revitalization of the shipbuilding industry; On February 18, the executive meeting of the State Council reviewed and approved the revitalization plan for the electronic information industry; On February 19, the revitalization plan for light industry and petrochemical industry was approved; On February 25, the revitalization plan for nonferrous metals and logistics industry was also approved. So far, the ten major industrial adjustment and revitalization plans have been released, and their implementation time will be from 2009 to 2011

Copyright © 2011 JIN SHI